 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
||||||||
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
||||||||
| |
|
|
|
|
|
|
|
|
|
|
|
|
Powder
Coating Pricing - Standard Powders |
|
| Air Cleaner |
$35-$75 |
| Alloy Wheel | $50-$150 |
| Alternator Housing |
$25-$40 |
| Brake Mounting Plates |
$10-$25 |
| Brake Calipers - pair |
$20-$75 |
| Brake Drums - pair | $25-$40 |
| Brake Booster (disassembled) |
$40 |
| Battery Box |
$20-$45 |
| Brackets - Accessory |
$15-$65 |
| Carburetor Body |
$45-$75 |
| Carburetor Bowls |
$15-$25 |
| Coil Springs |
$25-$65 |
| Coil Bracket |
$10 |
| Control Arms |
$40-$75 |
| Cylinder Heads |
$75-$150 |
| Engine Block (varies
by size) |
$175-$450 |
| Fan Shroud |
$45-$75 |
| Headlight Ring |
$15-$30 |
| Hood Hinges (pr) |
$30-$50 |
| Idler Arms |
$10-$20 |
| Intake Manifold (carb) |
$100-$175 |
| Intake Manifold (efi) |
$100-$350 |
| Intake Plenum |
$40 |
| Intake water crossover
pipe |
$25 |
| Nitrous bottle brackets
(pr) |
$20 |
| Oil Pan |
$55-$100 |
| Overflow Tank |
$15-$55 |
| Pulley |
$10-$35 |
| Rear End Cover |
$20-$35 |
| Rear End Housing (solid
axle) |
$150 |
| Rear End Pumpkin (irs) |
$65 |
| Springs (coil) |
$25-$45 |
| Stablizer / Sway Bar |
$30-$50 |
| Timing Cover (small) |
$15-$45 |
| Timing Cover (Large) |
$75-$100 |
| Thermostat Housing |
$10-$20 |
| Transmission Pan |
$30-$55 |
| Transmission Housing |
$200-$300 |
| Transmission Dipstick |
$15 |
| Valve Covers |
$45-$100 |
| Water Pump |
$35 |
| Wiper Arms - Each |
$20 |
|
Pricing
listed above is based on receipt of parts stripped to bare metal and degreased.
Stripping and part prep is available for additional charge. Mutli-Layer
and Translucent candy colors are available at an additional cost. For
additional pricing information or quote please email quote@braincoating.com
|
|
|
2000*
Ceramic Coating Pricing |
|
| Cast Manifold - Exterior Coating - Pair | $120 |
| Cast Manifold - Interior & Exterior Coating - Pair | $180 |
| Cast Manifold - Interior & Polished Exterior Coating - Pair | $300 |
| Shorty Headers - Exterior Coating - Pair | $120 |
| Shorty Headers - Interior & Exterior Coating - Pair | $180 |
| Mid Length Headers - Exterior Coating - Pair | $160 |
| Mid Length Headers - Interior & Exterior Coating - Pair | $240 |
| Full Length
Headers - Exterior Coating - Pair |
$230 |
| Full Length Headers - Interior & Exterior Coating - Pair | $300 |
| Turbocharger Housing | $85 |
| Turbocharger/Exhaust Piping - Exterior Coating | $15/ft. |
| Turbocharger/Exhaust Piping - Interior & Exterior Coating | $25/ft. |
|
Pricing
Listed above includes basic surface conditioning and preparation of up
to 30 minutes of media blasting per manifold or header. Porting Services
are available for most manifolds & headers. Additional preparation
may be required on parts in poor condition for an additional charge. |
|
